Lightly used automated vacuum switch PLUS Cyclone Dust Separator. Both are in perfect working order, selling because I upgraded to a permanently installed full-shop dust collection system. Below are the details of both the switch and the cyclone. 

Send me a message if you are interested or have any questions.

The World’s Finest Automated Dust Control System

·         HEALTH - SAFETY - CONVENIENCE - Automatic startup of your dust collection system

·         Three Modes of Operation – Auto, Off and On

·         Turn On Delay – avoids circuit breakers being tripped

·         Turn Off Delay – ensures that your work area continues to be cleared of remaining airborne debris even after the tool has powered down

·         Dual Inputs – permits operation from two separately protected AC circuits, when the combined power from the tool and the vacuum exceeds 15 Amps

·         Power Cord Protection – both power cords are individually protected with two 15 Amp circuit breakers

·         Continuous Operation – designed for continuous operation of your shop vac for other cleanups

·         iVAC Switch products automatically turn on your dust collector keeping your home workshop cleaner and healthier by reducing dust build-up and mitigating airborne dust particles

·         Easy-to-use, easy to install

·         You'll never say: "I'll clean it up later" again

·         Shop dust control is critical for workshops, and woodworking in general

·         iVAC automated dust collection system makes your shop safer and more convenient so you spend less time cleaning and more time creating

·         iVAC automated dust control systems are used in schools, by trades and in professional workshops to ensure optimum dust control

HEALTH

• The iVAC Dust Collector Switch Box is an inexpensive, simple to use automated dust controller that activates your shop vacuum automatically whenever the power tool to which it’s attached is turned on
• With this easy-to-use dust collector switch, you’ll be amazed at how much cleaner renovation work can be
• Dust and debris is collected immediately, extraneous airborne dust is mitigated and clean-up is much easier

SAFETY

• Focus on your work! Don't concern yourself with turning your dust collection system on and off
• You’ll breathe easier, and ensure a safer working environment, the iVAC Switch Box powers up immediately, it helps to clear out any debris that may be stuck in the power tool and which can become a dangerous projectile – however small
• The iVAC Dust Collector Switch Box automatically turns the shop vacuum on before you actually begin your cut, and will continue to draw debris as long as the power tool is on
• Installation is simple. If you can connect an electrical cord, you can connect an iVAC Dust Collector Switch

CONVENIENCE

• The iVAC Dust Collector Switch Box was designed specifically for the home, where typically only 115Vac services are available
• It is designed to control Shop Vacs up to 5 Peak HP and Dust Collectors up to 1 HP
• The attached power tool can literally be any type of 115V-15A power tool such as
• a light-duty table saw
• a portable sander
• dremel tools
• a miter saw

FUNCTIONALITY

• It removes the distraction of turning a dust collection system on and off while operating potentially dangerous power tools
• It ensures that dust and debris are collected as you cut, as opposed to being cleaned up with greater difficulty after the mess is done
• It mitigates airborne dust by trapping it while it’s being generated by the power tool
• Airborne dust is hazardous and can lead to a variety of ailments
• Uncollected dust can be a hazard as it can make surfaces like hardwoods and laminates slippery and can lead to a fall
• Tools can be notorious for sending out residual debris when they are first powered up because we tend not to clean the surface after every cut.

The Dust Deputy DIY Standalone Anti-Static Cyclone Separator

·         INCREASED SUCTION POWER - Now 20% more efficient with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!

·         LONGER LIFESPAN - Prevents fine dust and large debris from reaching your wet/dry vacuum's filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy DIY will save you money on expensive replacement filters and dust bags, and time, allowing you to focus on the task at hand.

·         WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2. 0" ports for secure fittings using a variety of dust collection hose sizes. Works with most materials: wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!

·         MADE IN AMERICA – Our Dust Deputy DIY (Do-It-Yourself) cyclone lets you build the dust control system that works best for you. DIY product contains the cyclone separator, gasket, and mounting hardware. You supply the waste container, the hose, etc. With the Dust Deputy DIY cyclone, you're limited only by your imagination!

Tired of using your wet/dry vacuum and getting poor results? Oneida Air System's Dust Deputy will transform your wet/dry vacuum and the way you work by trapping dust in a barrel and NOT in your vacuum's filter. Injection-molded from translucent anti-static resin, the patented design of Oneida Air's Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air stream before it reaches your vacuum's filter, eliminating clogged filters and suction loss while extending the life of your wet/dry vac! The Oneida Dust Deputy DIY (Do-It-Yourself) cyclone lets you build the dust control system that works best for you. You supply the waste container, the hose, etc. Then add the award-winning Dust Deputy cyclone separator. With the DIY cyclone, you're limited only by your imagination! The Dust Deputy will save you money on expensive replacement filters and dust bags, and time, allowing you to focus on the task at hand! This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2. 0" ports for secure fittings using a variety of hose sizes.