Call us with any questions at 785-661-2241 or visit us online at www.afwfilters.com

Complete System

• 10-inchx54-inch resin tank
• Riser tube with distributor basket
• 1.5 cubic feet fine mesh resin
• Fleck 5600SXT Digital Metered Control Head
• Choice of connection
• Standard Brine Tank with Safety Float

On-Demand

Flow meter measures water and regenerates based on water use, not time, conserving salt and water

48k (48,000) grain capacity

Contains 1.5 cubic feet of fine resin capable of removing up to 48,000 grains of compensated hardness (hardness factoring in iron and manganese) between regeneration cycles

Fine Mesh Resin

Specifically designed for treatment of both ferrous (red water) and ferric (clear water) iron, up to a maximum of 8 ppm

12 GPM Service Flow

Treats a maximum flow rate of 12 gallons per minute

Removes Water Hardness

Ion exchange process physically removes the ions that cause hard water

Removes Iron & Manganese

Specially designed resin traps iron and manganense as well as the hardness

Eliminates Scale

Water that has been softened does not form scale buildup on faucets or fixtures or inside pipes

Reduces Soap Use

Soft water improves soap efficiency, reducing the amount required for dishes, laundry, and bathing.

Fleck 5600SXT Control Head

Maximum efficiency with simple LCD display and touchpad controls for user friendly control

Structural USA Resin Tank

Durable, high quality polyglass tank made by a trusted name in tank manufacturing

Standard Square Brine Tank

Used for holding salt used during the regeneration process. Measures approximately 15-inchx17-inchx33-inch and holds approximately 250 lbs of salt

DIY Installation

Simple system connections and detailed installation instructions allow most homeowners to install this system themselves. For those who prefer to leave the work to a professional, most plumbers can install the system in 1-2 hours.

Hard water causes a multitude of problems. Scale build-up restricts pipes, builds up on fixtures, and can degrade appliances. Hard water spots are also common on dishes and many other surfaces. The ions that comprise hard water attract soap molecules, requiring more soap to get the job done. This also causes an increase in soap scum and can prevent the removal of dirt and bacteria when bathing. Hard water has also been know to cause hair and skin to be brittle and dry.

Water softeners use an ion-exchange process to remove the ions that create hard water, eliminating hard water and the problems associated with it. Automatic regeneration initiated by a high quality Fleck metered head means high efficiency, consistent water treatment, and low maintenance. Soft water will extend the life of your appliances, decrease soap requirements, and decrease the occurrence of soap scum. Softer hair and skin are also common when using water that has been softened.

Controlled by the digital Fleck 5600SXT, efficiency and control come together in a user friendly interface. On demand regeneration keeps up with high demands and conserves water and salt when demand is low. This results in consistent treatment and higher efficiency. Backed by an outstanding 5-year warranty and built around the tried and true 5600 valve, these heads are sure to last for years to come.

The durable polyglass resin tank is manufactured by Structural USA and is backed by a 10 year warranty. The simple design allows for installation almost anywhere without being unsightly. NOTE: Tank color may vary from the one shown

This system comes complete with a brine tank that includes a float assembly for added reliability and peace of mind. Capable of holding up to 250 lb of salt, the large capacity of this brine tank requires infrequent addition of salt and reduces maintenance. NOTE: Color and design may vary from the system pictured