Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4

Dixon ZTR 3536 (2003)

CHASSIS: 1X2X11 gauge welded tube, 7 gauge transmission and engine base plate.

BODY: All body parts made of high density polyethylene. Dent and corrosion resistant.

MOWER DECK: Cut Width. 36” Deck: 11 GA Fabricated Construction/Reinforcement Ribs-36” Cut Width. Cut height approximately 1” to 4” via 7 position lift handle.

BLADE DRIVE: Electric clutch.

TRANSMISSION: Each rear wheel is independently driven by a HydroGear IZT hydrostatic drive.

ENGINE: Model 3536: 14.5 HP Briggs & Stratton Intek, 4-Cycle, Single Cylinder, Overhead Valve, Air-Cooled, Gasoline, Vertical Shaft with Cast Iron Cylinder Sleeve, pressure lube with spin-on filter.

STARTING Electric by key switch operation with safety interlock bladeand

SYSTEM: traction drive.

CAPACITIES: Fuel 3.3 gallons total Engine 1.5 quarts oil

DIMENSIONS: Width 44” maximum track width Height 42” to top edge of seat Length 73” hitch tab to front bumper Weight 3530 - 512 lbs 3536 - 554 lbs.