We have in stock, here in Colby an excellent selection of useful spray cleaners and lubricants for your Motorcycle or other Vehicle!!

Miracle Wash: $9.85

MP Heavy Duty Metal Protector: $10.15

MP Metal Protector: $6.40

Power Foam Engine Cleaner:$8.70

Heavy Duty Degreaser: $15.90

Chain Lube: $10.25

Miracle Wash® Waterless Wash & Wax (AMW) is a unique dry car wash and wax that delivers outstanding performance and quick, easy and economical application. No water is required; specially formulated surfactants lift dirt and other particles from the surface and hold them in suspension. Miracle Wash then acts as a shield, protecting the surface from abrasion while you wipe the dirt clean.

• Requires just two easy steps – spray and wipe
• Leaves vehicles with a fantastic shine and tough protective finish
• No soap or water required
• Repels dust and light dirt
• Protects against the sun's ultraviolet rays
• Effective on virtually all non-porous and painted surfaces

Applications

• Cars and Trucks
• RVs
• Motorcycles
• Boats
• Kitchen Appliances
• Countertops
• Windows
• Mirrors
• And More

Not available in Canada

For detailed typical technical properties, download the product data bulletin.

AMSOIL Heavy Duty Metal Protector helps protect metal surfaces that require a heavy-duty lubricant or are exposed to the damaging effects of salt, moisture or chemical corrosion. Ideal for hinges, wire ropes and springs, nuts and bolts, motorcycle or bicycle chains, and for undercoating wheelwells and other metal surfaces exposed to water, dirt or road salt.

• Helps protect against rust & corrosion, even in salt water
• Displaces water
• Stops squeaks
• Lubricates metal surfaces
• Leaves a dry, long-lasting, (wax-like) film
• Lubricant does not attract dust
• Does not sling off
• Sprays into hard-to-reach places
• Ideal for chains & other heavy-use items

Recommendations
Spray product on area to be treated. For best results, do not wipe off. Film carrier will evaporate, leaving Heavy Duty Metal Protector on treated surface.

Availability
AMSOIL Heavy Duty Metal Protector is available in 16-oz. spray cans.

AMSOIL Metal Protector (AMP) is a high-performance, easy-to-use spray-on product that lubricates, displaces moisture, protects against corrosion and penetrates to free rusty parts. It does not form gum or sludge.

AMSOIL Metal Protector effectively lubricates moving parts, silencing squeaks without gumming up mechanisms. It displaces moisture from freshwater or saltwater to help prevent corrosion, and it is the product of choice for drying and protecting electrical and ignition systems. Metal Protector penetrates deep through rust and corrosion to restore movement of rusty parts. It is excellent for protecting firearms and other fine componentry, and it helps prevent jamming, especially in cold weather. Metal Protector contains no silicone, and is compatible with plastic, leather, fabric, fishing line and paint.

• Cuts through rust & frees frozen components
• Helps protect against rust & corrosion, even in salt water
• Displaces water
• Stops squeaks
• Clean
• Sprays into hard-to-reach places
• Protects electrical equipment
• Ideal for firearms & other fine componentry
• Lubricates moving parts

Recommendations
Shake well before use. Spray product on area to be treated. For best results, do not wipe off. Film carrier will evaporate, leaving Metal Protector protection in place. Disconnect power source to electrical equipment before spraying.

AMSOIL Metal Protector (AMP) is a high-performance, easy-to-use spray-on product that lubricates, displaces moisture, protects against corrosion and penetrates to free rusty parts. It does not form gum or sludge.

AMSOIL Metal Protector effectively lubricates moving parts, silencing squeaks without gumming up mechanisms. It displaces moisture from freshwater or saltwater to help prevent corrosion, and it is the product of choice for drying and protecting electrical and ignition systems. Metal Protector penetrates deep through rust and corrosion to restore movement of rusty parts. It is excellent for protecting firearms and other fine componentry, and it helps prevent jamming, especially in cold weather. Metal Protector contains no silicone, and is compatible with plastic, leather, fabric, fishing line and paint.

• Cuts through rust & frees frozen components
• Helps protect against rust & corrosion, even in salt water
• Displaces water
• Stops squeaks
• Clean
• Sprays into hard-to-reach places
• Protects electrical equipment
• Ideal for firearms & other fine componentry
• Lubricates moving parts

Recommendations
Shake well before use. Spray product on area to be treated. For best results, do not wipe off. Film carrier will evaporate, leaving Metal Protector protection in place. Disconnect power source to electrical equipment before spraying.

AMSOIL Power Foam® (APF) improves engine performance by removing gum, varnish and carbon deposits that affect power, operation, idle and fuel economy. Power Foam cleans intake valves, intake manifolds and throttle plates to keep the combustion intake system running at peak efficiency. Effective in both two-cycle and four-cycle gasoline engines, AMSOIL Power Foam helps reduce engine ping and keeps carburetors and injector systems operating like new. Power Foam is safe for fuel injectors, catalytic converters and emission control devices. It will not damage seals, gaskets, rubber or plastic materials commonly used in gasoline engines.

Performance Features

• Cleans deposits from ethanol and degraded fuel
• Removes gum and varnish
• Maximizes horsepower
• Restores startability
• Helps improve fuel economy
• Reduces pollution

Applications

• UTVs/ATVs
• Boats
• Motorcycles
• Lawn Equipment
• Tractors
• Automobiles

Directions Power Foam!

1. Protect painted surfaces and mass airflow sensors (MAF) from spray.
2. Ensure application is in a well-ventilated area.
3. Run engine to normal operating temperature and remove air cleaner assembly.
4. While engine is running, spray foam directly into throttle body as fast as possible without stalling engine.
5. Shut off engine and allow to sit for 10-15 minutes.
6. Replace air cleaner.
7. Restart engine. Repeat application of Power Foam as needed.

In extreme cases, disassemble carburetor and soak parts.

Recommendations

Avoid contact with hoses and exterior plastic components. To prevent the dissolving of paint, do not overspray. AMSOIL Power Foam is not recommended for use in diesel engines or as a general purpose degreaser.

• Dissolves oil, tar and grime
• Removes sticky residue
• Works fast
• Low-VOC formula
• Non-foaming

Applications

• Metal Surfaces
• Oil-Stained Concrete
• Automotive and Truck Engines
• Adhesive-Coated Surfaces
• Heavy-Duty Equipment
• Gears and Chains
• Powersports Equipment
• Farm Equipment and More

Directions Chain Lube

1. Spray, allow product to penetrate grime for 1-2 minutes.
2. Wipe with clean cloth or continue spraying to flush contaminants.
3. Repeat as necessary.

Performance Features

• Outstanding protection against wear and corrosion
• Helps extend chain life
• Does not attract dirt
• Does not fling off
• Easy application
• Fast-drying
• Sprays from any position

APPLICATIONS
AMSOIL Chain Lube is suitable for all types of chains, including O, X and Z roller chains found in street, off-road and racing motorcycles. It is also excellent for bicycle, agricultural and industrial applications.

Directions
Shake well. Clean chain prior to application. Apply a steady stream along the full length of the chain. Allow to dry for 15 minutes.

AMSOIL PRODUCT AVAILABILITY
AMSOIL Chain Lube is available in 11-oz. spray cans.

AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty.aspx.

For detailed typical technical properties, download the product data bulletin.