For sale is my 1951 Buick Model 48d 2 Door Sedan.
This was my project car for the last few years but I have decided to move and don’t
See myself dragging it across the country. I shaved the fire wall and was going to do the same to the dash but did not get to it. Therefore the only dash components I kept was the glove box door and it associated parts. This was going to be a daily driver so I replaced the sub-frame with a 1980 Firebird sub-frame. It was sand blasted and fitted with all new high end components. Now you can have power steering and power brakes plus your set up for any V6 or V8 engine you desire.

All the window regulators, and original glass is included. I have the wind shield and glass stored so it is not in the photos but does come with he car. The flat glass has typical yellowing, bubbling, or hazing around edges for its age and Id rate it about a 7. Has the awesome curved three piece back windows. Feel free to write me with questions or make an appointment to see the beast. Car is currently titled in Kansas as a 1949 Buick with matching VIN plate. You are welcome to the 1949 title or I will write you a bill of sale for a 1951 Buick– Your choice! The parts are all from this car. Good Luck Happy Bidding!

1980 Firebird sub-frame features:
New Rotors
New Bearings
New Tie Rods & Ends
New Upper and Lower Ball Joints
New Brake Calipers
New Metallic Carbon Brake Pads
New Gas Shocks
New Coil Springs
New Idler arm
New Energy Suspension Sway Bar Mounts
New Energy Suspension Control Arm Bushings
New Energy Suspension Sway Bar Linkage
Original 1980 Power Steering Pump (For Reference and Mockup)

Car and Parts:
Complete Stainless Trim Set
Front bumper
Front grille
Upper grille bar
Front bumper cannon lights.
Front bumper mounts
inner fenders
Core and Radiator support
Rear bumper
Rear bumper insert
Rear bumper mounts
All door handles, locks and door striker plates and corresponding hardware.
Trunk Dyna-Flow Lock Bezel
All original flat glass, windshield, three piece curved back window
All four window regulators, window regulator tracks,
Wing windows in frames.
Full set Inner Window Moldings
Headliner Support Rods
Headliner retention strips
Parking brake
Steering Column
Front and Rear Bench Seat Frames
Dome Light Bezel
Glove box insert ( for pattern use)
Glove box door, lock, stopping arm, and hinges.
Front and rear arm rests
6 Front Fender Port Holes
4 – 15” Oem Hubcaps
4 – 15” Oem Buick Rims (Nice blasted, sealed, painted)
2 – 15” GM Rims (for new front end )
Plus 4 decent tires that hold air to roll it all around on! Win Win!

Complete photos at:

www.made2save.com/1951_Buick_Sale.html

or email me for link. Thank you