ATV Mounted Tree Chopper

• Favorite Listing

ATV-X Model 1001 Tree Chopper. This one is very similar to the DR Treechopper that runs around $1300. This was purchased new and used only one day to clear a pasture. In really great condition. No knicks on the blades. This includes the original mounting bracket that was modified to attach to a Polaris 500 Sportsman without having to drill holes in the ATV frame. For more information please message me to get contact information as this is being listed for someone else. Please read the following information about this chopper and includes a link to a youtube video about this chopper.

http://www.youtube.com/watch?v=L_VljUmmCvE

The TREECHOPPER is designed and manufactured by ATV-X, Inc. and attaches to most All Terrain Vehicles (ATVs). Its simple yet effective design allows the TREECHOPPER to float over even the roughest terrain while cutting a variety of unwanted trees and vegetation. By utilizing an ATV as the workhorse, the TREECHOPPER can cut trees quickly in a variety of conditions and environments.

The TREECHOPPER can safely cut trees up to four inches in diameter and very close to ground level which is necessary to lessen the possibility of re-growth.

The TREECHOPPER takes the labor out of tree growth management and puts fun back into work!

The TreeChopper can be installed on ATVs that are 400cc and larger. Smaller ATVs should have 4 wheel-drive and can only be used to cut smaller trees.
The mounting bracket attaches to the frame/skid plate of your ATV and must be heavy metal. Secure mounting is necessary for safe and successful use of the TreeChopper.
The mounting bracket is securely affixed to the ATV frame by using (at least) 4 straight or u-shaped bolts which are not included.

Some grinding or flattening of the ATV mounting area may be required. This is done to insure that the mounting bracket fits securely to the frame of the ATV. It may be necessary to drill holes through the mounting bracket and the ATV frame/skid plate.

The mounting bracket must be fastened tight to the frame or metal skid plate. If there is a plastic skid plate between the bracket and the frame it will need to be removed so that the bracket tightens flat against the ATV frame.